Menu
Furnace & AC Maintenance
Keep equipment care on your calendar with a maintenance plan for your home’s heating and cooling appliances.
Make maintenance part of your home’s routine.
Give your furnace and air conditioner the attention they need with Henry’s Heating & Cooling. Our maintenance plan combines equipment care with savings on installations and service calls.
Explore the furnace and AC checklists below to see what we check, inspect, and clean during maintenance. Contact us to discuss the appliances you’d like to include and arrange your maintenance schedule.
Maintenance Plan
$10
per month, per appliance
- Maintenance for your enrolled appliance
- 10% off installations
- 20% off all service calls
For example, a furnace and an air conditioner are two appliances: $20 per month.
Ask About the Maintenance PlanWhat’s included in furnace maintenance.
A detailed look at your furnace’s controls, heating components, airflow, and venting, with cleaning and adjustments as outlined below.
- Check thermostat functions, settings, and location.
- Inspect the primary heat exchanger and secondary heat exchanger, if applicable.
- Check and lubricate the fan or pump motor, as applicable.
- Check blower motor amperage, as applicable.
- Check the filter system; clean or replace if the customer has a filter.
- Check the pilot burner and flame rod; clean as required.
- Check safety controls, including wiring, condition, and application.
- Check and adjust heat rise as required.
- Test for carbon monoxide in the flue and surrounding air.
- Check the humidifier damper’s seasonal position: open for winter.
- Inspect gas piping for code compliance.
- Inspect the chimney and venting system.
- Clean burners as required.
- Clean the blower as required.
- Clean the secondary heat exchanger as required.
- Check the condensate pump and lines; clean as required.
- Check the firing rate and adjust as required.
- Inspect electrical connections; tighten and clean as required.
- Check system airflow.
- Locate and identify the system switch and/or breaker.
- Perform a camera inspection.
Checks are performed as applicable to your equipment. Cleaning and adjustments follow the conditions noted above; replacement filters are customer-supplied.
What’s included in AC maintenance.
Checks for your air conditioner’s electrical components, cooling performance, coils, and drainage, with cleaning and adjustments as outlined below.
- Check thermostat functions, settings, and location.
- Check and lubricate the furnace fan motor, as applicable.
- Check blower motor amperage, as applicable.
- Check the filter system; clean or replace if the customer has a filter.
- Check the contactor; clean as required.
- Inspect the condenser fan motor and blades.
- Check the condenser coil; clean as required.
- Check the compressor.
- Check superheat and subcooling readings.
- Check the evaporator temperature drop.
- Check the humidifier damper’s seasonal position: closed for summer.
- Check the condensate pump and lines; clean as required.
- Inspect electrical connections; tighten and clean as required.
- Check capacitors for leakage and function.
- Check electrical loads and current draw.
- Clear debris from the condenser.
- Inspect service valves.
- Clean the blower as required.
- Inspect the evaporator coil; clean as required if accessible.
- Locate and identify the system switch and/or breaker.
- Review performance and air distribution with the customer, including settings and register adjustments as appropriate.
Checks are performed as applicable to your equipment. Cleaning and adjustments follow the conditions noted above; replacement filters are customer-supplied.
A more comfortable home
starts with a conversation.
Need service, planning an upgrade, or simply have a question? Tell us what’s happening, and we’ll help you with the next step.